Canon EOS 1300D Page 231 Instruction Manual Download

Page: 231 / 326

231

Erasing Images

Select [Select and erase images].



Select [

Select and erase images

then press <



An image will be displayed.



To display the three-image display,
press the <

> button. To return to

the single-image display, press the
<

> button.

Select the images to be erased.



Press the <

> <

> keys to select

the image to be erased, then press
the <

> <

> keys.



A checkmark [

] will be displayed on

the upper left of the screen.



To select another image to be erased,
repeat step 3.

Erase the image.



Press the <

> button.



Select [

], then press <



The selected images will be erased.

You can erase all the images in a folder or on a card at one time. When
[

1: Erase images

] is set to [

All images in folder

] or [

All images on

card

], all the images in the folder or on the card will be erased.

Erasing All Images in a Folder or on a Card

To erase all images including protected images, format the card (p.52).

Summary of Contents for EOS 1300D







































































































































































































































































































































Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands

Canon EOS 1300D, Instruction Manual

Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands