Canon EOS 1300D Page 218 Instruction Manual Download

Page: 218 / 326

218

Play back the image.



Press the <

> button to display an

image.

Select a movie.



Press the <

> <

> keys to select a

movie.



In the single-image display, the
<

> icon displayed on the

upper left of the screen indicates a
movie. If the movie is a video
snapshot, [

] will be displayed.



In the index display, perforations at
the left edge of a thumbnail indicate a
movie.

As movies cannot be played

back from the index display, press
<

> to switch to the single-image

display.

In the single-image display, press
<



The movie playback panel will appear
at the bottom of the screen.

Play back the movie.



Select [

] (Play), then press <



The movie will start playing back.



You can pause the movie playback by
pressing <



You can adjust the built-in speaker’s
volume by turning the <

> dial

even during movie playback.



For more details on the playback
procedure, see the next page.

Playing Back Movies

Speaker

Summary of Contents for EOS 1300D







































































































































































































































































































































Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands

Canon EOS 1300D, Instruction Manual

Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands