Canon EOS 1300D Page 212 Instruction Manual Download

Page: 212 / 326

212

You can rate images (still photos and movies) with one of five rating
marks:

. This function is called rating.

Select [Rating].



Under the [

] tab, select [

Rating

then press <

Select an image.



Press the <

> <

> keys to select a

still photo or movie to be rated.



By pressing the <

> button, you

can select images from a three-image
display. To return to the single-image
display, press the <

> button.

Rate the image.



Press the <

> <

> keys to select a

rating.



When you select a rating for the
image, the number beside the set
rating will increase by one.



To rate another image, repeat steps 2
and 3.



To return to the menu, press the
<

> button.

Setting Ratings

Summary of Contents for EOS 1300D







































































































































































































































































































































Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands

Canon EOS 1300D, Instruction Manual

Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands