Canon EOS 1300D Page 83 Instruction Manual Download

Page: 83 / 326

The easiest way to play back images is explained below. For more
details on the playback procedure, see page 207.

Play back the image.



Press the <

> button.



The last image captured or played
back will appear.

Select an image.



To view images starting with the last
captured image, press the <

> key.

To view images starting with the first
(oldest) image, press the <

> key.



Each time you press the <

> button,

the information display will change.

Exit the image playback.



Press the <

> button to exit the

image playback and return to the
shooting function settings display.

Image Playback

Basic information display

Histogram

Basic infor

Image quality/Playback number

Shooting information display

Summary of Contents for EOS 1300D







































































































































































































































































































































Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands

Canon EOS 1300D, Instruction Manual

Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands