Canon EOS 1300D, Instruction Manual, Page: 37 / 326

37
Installing and Removing the Battery and Card
1
Set the power switch to <
2
>
(p.39)
.
2
Open the cover.

Make sure the access lamp is off,
then open the cover.

If [ Recording ...] is displayed, close
the cover.
3
Remove the battery.

Press the battery lock lever as shown
by the arrow and remove the battery.

To prevent short circuiting of the
electrical contacts, be sure to attach
the provided protective cover (p.34)
to the battery.
4
Remove the card.

Gently push in the card, then let go to
eject it.

Pull the card straight out.
5
Close the cover.

Press the cover until it snaps shut.
Removing the Battery and Card
After opening the card slot/battery compartment cover, be careful not to
forcefully swing it back further. Otherwise, the hinge may break.

The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.

Setting [
z
1: Release shutter without card ] to [ Disable ] will prevent
you from shooting without a card inserted (p.184).