Canon EOS 1300D, Instruction Manual

Page: 296 / 326

Troubleshooting Guide
296

During autoexposure movie shooting, if there is a drastic change in the
exposure level, the recording will stop momentarily until the brightness
stabilizes. In such cases, shoot movies with manual exposure (p.162).

An HDMI cable (sold separately) is necessary to connect the camera
to a TV set. Using the HDMI Cable HTC-100 (sold separately) is
recommended (p.226).

Also check that your TV set has an HDMI IN terminal. If the TV set
does not have an HDMI IN terminal and has only an A/V IN jack, the
camera cannot be connected.

Check that the HDMI cable’s plug is inserted all the way in (p.226).

If [
5
3: Wi-Fi/NFC ] is set to [ Enable ], the camera cannot be connected
to a TV set. Set [ Wi-Fi/NFC ] to [ Disable ], then reconnect the camera
to the TV set with an HDMI cable.

Depending on the card reader and computer OS used, SDXC cards
may not be correctly recognized. In such a case, connect your camera
to the computer with the interface cable, then transfer the images to
your computer using EOS Utility (EOS software, p.314).

JPEG
c
and RAW images cannot be resized with the camera
(p.239).
The movie has still moments.
I cannot connect the camera to my TV set.
No picture on the TV set.
My card reader does not recognize the card.
I cannot resize the image.