Canon EOS 1300D, Instruction Manual, Page: 275 / 326

275
H
Using Eye-Fi Cards
5
Check the [Access point SSID:].

Check that an access point is
displayed for [
Access point SSID: ].

You can also check the Eye-Fi card’s
MAC address and firmware version.

Press the <
M
> button three times
to exit the menu.
6
Take the picture.
 The picture is transferred and the
<
H
> icon switches from gray (not
connected) to one of the icons below.

For transferred images,
O
is
displayed in the shooting information
display (p.232).
H
(Gray) Not connected : No connection with access point.
H
(Blinking) Connecting... : Connecting to access point.
H
(Illuminated) Connected : Connection to access point established.
H
(  ) Transferring... : Image transfer to access point in progress.
Transmission status icon
Cautions for Using Eye-Fi Cards

If [
5
3:Wi-Fi/NFC ] is set to [ Enable ], image transfer with an Eye-Fi card
is not possible.

If “
J
” is displayed, an error occurred while retrieving the card
information. Turn the camera’s power switch off and on again.

Even if [
5
1: Eye-Fi trans. ] is set to [ Disable ], it may still transmit a
signal. In hospitals, airports, and other places where wireless
transmissions are prohibited, remove the Eye-Fi card from the camera.

If the image transfer does not function, check the Eye-Fi card and
computer settings. For details, refer to the card’s instruction manual.

Depending on the wireless LAN’s connection conditions, the image
transfer may take longer or it may be interrupted.

The Eye-Fi card may become hot as it transmits.

The battery power will be consumed faster.

During the image transfer, auto power off will not take effect.

If you insert a wireless LAN card other than an Eye-Fi card, [
5
1: Eye-Fi
settings ] will not appear. Also, the transmission status icon <
H
> will not
appear.