Canon EOS 1300D, Instruction Manual

Page: 263 / 326

263
3
Custom Function Settings
N
C.Fn-5 High ISO speed noise reduction
This function reduces the noise generated in the image. Although
noise reduction is applied at all ISO speeds, it is particularly effective
at high ISO speeds. At low ISO speeds, the noise in the darker parts of
the image (shadow areas) is further reduced. Change the setting to
suit the noise level.
0: Standard 2: Strong
1: Low 3: Disable
C.Fn-6 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from
the standard 18% gray to bright highlights. The gradation between
the grays and highlights becomes smoother.

With setting 2, the maximum burst during continuous shooting will greatly
decrease. Also, the continuous shooting speed may be slower.

If you play back or directly print a
1
or
1
+
73
image with the
camera, the high ISO speed noise reduction effect may become smaller.
Check the noise reduction effect or print noise-reduced images with
Digital Photo Professional (EOS software, p.314).

If you send RAW images to a smartphone, the high ISO speed noise
reduction effect of saved images on the smartphone may become
smaller. Therefore, if you shoot RAW images, setting the image-
recording quality to
1
+
73
is recommended.

With setting 1, the Auto Lighting Optimizer (p.123) is automatically set to
[
Disable ] and the setting cannot be changed.

With setting 1, noise (grainy image, banding, etc.) may become slightly
more noticeable than with setting 0.
With setting 1, the ISO setting range will be ISO 200 - ISO 6400.
Also, the <
A
> icon will be displayed on the LCD monitor and in the
viewfinder to indicate that highlight tone priority is enabled.