manualshive.com logo in svg

Canon EOS 1300D, Instruction Manual, Page: 155 / 326

Share
Download
Canon EOS 1300D Instruction Manual Download Page 155

155

Using AF to Focus (AF Method)

3

Focus on the subject.

Aim the AF point over the subject and 
press the shutter button halfway.

The Live View image will turn off, the 
reflex mirror will go back down, and 
AF will be executed. (No picture is 
taken.)

When focus is achieved, the AF point 
that achieved focus will turn green 
and the Live View image will 
reappear.

If focus is not achieved, the AF point 
will turn orange and blink.

4

Take the picture.

Check the focus and exposure, then 
press the shutter button completely to 
take the picture (p.140).

You cannot take a picture during autofocusing. Take the picture while the 
Live View image is displayed.

Summary of Contents for EOS 1300D







































































































































































































































































































































Reviews:

No comments