Canon EOS 1300D (W), Wireless Function Instruction Manual

Page: 99 / 144

99
Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access points nearby.
1
Select [Wi-Fi function].

Under the [
5
3 ] tab, set [ Wi-Fi/NFC ]
to [ Enable ], then select [ Wi-Fi
function ] (p.17).

If a screen for setting a nickname (for
identification) appears, register a
nickname (p.14).
2
Select [
m
].

Select [
m
] (Upload to Web service)
and press <
0
>.
3
Select a Web service.

Select a Web service to connect to,
then press <
0
>.

The contents and ordering of the list
of items displayed will vary depending
on settings (p.91).

The Web service to connect to can be
changed when reconnecting (p.108).
 The camera’s <
k
> lamp will blink.

Depending on the selected Web
service, the [
Send to ] screen is
displayed. Select a destination
(p.103).
Connecting to a Detected Network Manually
Selecting the Access Point