Canon EOS 1200D, User Manual

Page: 82 / 342

82
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
1 Set the Mode Dial to <
d
>.
2 Focus on the subject.
Look through the viewfinder and aim
the selected AF point over the
subject. Then press the shutter button
halfway.
X
The dot inside the AF point achieving
focus lights up briefly in red, and the
focus confirmation light <
o
> on the
viewfinder’s bottom right lights up (in
One-Shot AF mode).
X
The shutter speed and aperture will
be set automatically and displayed in
the viewfinder.
3 Check the display.
A standard exposure will be obtained
as long as the shutter speed and
aperture displays do not blink.
4 Take the picture.
Compose the shot and press the
shutter button completely.
d
: Program AE
If you use a TS-E lens to shift or tilt the lens or use an Extension Tube, the
standard exposure may not be obtained or an irregular exposure may result.
COP
Y