217
Handy Features
You can set how long the image is displayed on the LCD monitor
immediately after capture. If [
Off
] is set, the image will not be displayed
immediately after image capture. If [
Hold
] is set, the image review will
be displayed up until the [
Auto power off
] time.
During image review, if you operate any camera controls such as
pressing the shutter button halfway, the image review will end.
Under the [
z
1
] tab, select [
Image
review
], then press <
0
>. Select the
desired setting, then press <
0
>.
To save battery power, the camera turns off automatically after the set
time of idle operation elapses. You can set this auto power-off time.
When the camera has turned off due to auto power off, you can turn it
on again by pressing the shutter button halfway or pressing any of the
following buttons: <
M
>, <
B
>, <
x
>, <
A
>, etc.
If [Disable] is set, either turn off the camera or press the <
B
>
button to turn off the LCD monitor to save battery power.
Even when [Disable] is set, if the camera is not used for 30 min.,
the LCD monitor will turn off automatically. To turn on the LCD
monitor again, press the <
B
> button.
Under the [
5
2
] tab, select [
Auto power
off
], then press <
0
>. Select the
desired setting, then press <
0
>.
3
Setting the Image Review Time
3
Setting the Auto Power-off Time
