Canon EOS-1 D X Mark II G, Instruction Manual

Page: 449 / 562

449
7
Custom Controls
AI Servo AF characteristics (p.113)
Press the <
p
> or <
A
> button to perform AF with the set case
from [ Case 1 ] to [ Case 6 ].
AF operation (p.88)
Press the <
p
> or <
A
> button to perform AF with the set AF
operation.
AF area selection mode (p.91)
Press the <
p
> or <
A
> button to perform AF with the set AF
area selection mode.
If you want to keep using the currently selected AF point when you
press the <
p
> or <
A
> button, set [ AF start position ] to
[ Manually selected AF point ]. If you want to keep the currently set AI
Servo AF characteristics, AF operation, and AF area selection mode,
select [
Maintain current setting ].
The AF will stop while you hold down the button assigned to this
function. Useful when you want to stop the AF during AI Servo AF.
: AF stop
If [
2
4: Orientation linked AF point ] is set to [ Separate AF pts:
Area+pt ] or [ Separate AF pts: Pt only ], you can separately register the
AF points to be used for vertical (grip up or down) and horizontal
shooting.
If [ Registered AF point ] and [ AF area selection mode ] are both set for
[ AF start position ], [ Registered AF point ] will take effect.