Canon EOS-1 D X Mark II G, Instruction Manual

Page: 325 / 562

325
You can change the settings of the ISO speed, sound-recording level,
etc. while suppressing the operation sound during movie shooting.
When [
z
5: Silent Control ] is set to
[ Enable
h
], you can use the touch pad
<
h
> on the inner ring of the Quick
Control Dial.
You can just touch on the top, bottom,
left, or right of <
h
> for silent operation.
During movie shooting, you can press
the <
Q
> button to enable the Quick
Control operation and change the
functions below with <
h
>.
*1: With ISO Auto set.
*2: With [
Sound recording: Manual/Line
input ] set.
3
Silent Control
Settable
Functions
Shooting Mode
d
/ bulb
s f a
Shutter speed – k – k
Aperture – – k k
Exposure
k k k k
* 1
ISO speed – – – k
Recording
level*
2
k k k k
n
Volume k k k k
If [
z
5: Silent Control ] is set to [ Enable
h
], you cannot perform Quick
Control setting with the <
5
> Quick Control Dial or <
6
> Main Dial
during movie shooting.
Even if you change the aperture silently with <
h
>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on the <
h
>, the touchscreen operation may not
work. In such a case, use a clean cloth to clean the <
h
>. If it still does
not work, wait a while and operate it again.
Before shooting a movie, you can use <
h
> with the [ Rec. level ] setting to
adjust the sound-recording level.