Canon EOS-1 D X Mark II G, Instruction Manual

Page: 173 / 562

173
3
Customizing a Picture Style
4
Set the parameter.
Adjust the parameter as desired, then
press <
0
>.
Press the <
M
> button to save the
adjusted parameters. The Picture
Style selection screen will reappear.
X
Any parameter settings different from
the default will be displayed in blue.
*1: Indicates the fineness of the outlines to be emphasized. The smaller the
number, the finer the outlines that can be emphasized.
*2: Sets how much the outline is emphasized based on the difference in contrast
between the subject and the surrounding area. The smaller the number, the
more the outline with low contrast difference can be emphasized. However,
noise tends to be more noticeable when the number is smaller.
Parameter Settings and Effects
g
Sharpness
A
Strength 0: Less sharp outline 7: Sharp outline
B
Fineness* 1
1: Fine 5: Grainy
C
Threshold*
2
1: Low 5: High
h
Contrast -4: Low contrast +4: High contrast
i
Saturation -4: Low saturation +4: High saturation
j
Color tone -4: Reddish skin tone +4: Yellowish skin tone
For movie shooting, [ Fineness ] and [ Threshold ] for [ Sharpness ] cannot
be set (not displayed).
By selecting [ Default set. ] in step 3, you can revert the parameter
settings of the respective Picture Style to their defaults.
To shoot with the Picture Style you adjusted, first select the adjusted
Picture Style, then shoot.