Canon E4200 Series, Online Manual, Page: 190 / 568

Note
• This setting may not be available depending on the country or region of purchase.
• TEL line auto select (China only)
If you select ON , the telephone line type is selected automatically.
If you select OFF , you can select the telephone line type manually.
Setting Telephone Line Type
Adv. FAX settings
• Err reduction (VoIP)
If you select Reduce , it may be possible to reduce the incidence of communication errors when
connecting to internet line such as IP phone.
Note
• When Reduce is selected, V.34 (Super G3) cannot be used. Communication time generally
becomes longer than when communicating with V.34 (super G3).
• This setting has priority even if you select 33600 bps for TX start speed or RX start speed .
• Auto redial
Enables/disables automatic redialing.
If you select ON , you can specify the maximum number of redial attempts and the length of time the
printer waits between redial attempts.
• Dial tone detect
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON , the printer transmits the fax after confirming the dial tone.
Note
• This setting may not be available depending on the country or region of purchase.
• Pause time settings
Sets the length of pause time for each when you enter "P" (pause).
• TTI position
Selects the position of the sender information (outside or inside the image area).
• Remote RX
Enables/disables remote reception.
If you select ON , you can specify the remote reception ID.
Remote Reception
190