manualshive.com logo in svg

Canon E 400, Online Manual

Share
Download
Canon E 400 Online Manual Download Page 356

Scanning Multiple Documents at One Time with ScanGear
(Scanner Driver)

You can scan two or more photos (small documents) on the Platen at one time on the 

Basic Mode

 tab and

Advanced Mode

 tab.

This section explains how to scan multiple documents from the 

Basic Mode

 tab.

Important

• To scan multiple documents as a single image, scan in whole image view.
• The following types of documents may not be cropped correctly. In that case, adjust the cropping

frames (scan areas) in whole image view and scan.

• Photos that have a whitish background
• Documents printed on white paper, hand-written text, business cards, etc.
• Thin documents
• Thick documents

Scanning Multiple Documents in Whole Image View

• The following types of documents may not be scanned correctly.

• Documents smaller than 1.2 inches (3 cm) square
• Photos that have been cut to various shapes

Note

• You can also scan multiple documents at one time from the 

Advanced Mode

 tab. Use the 

Advanced

Mode

 tab to make advanced scan settings such as the color mode, output resolution, image brightness,

and color tone.

• Refer to the corresponding sections below for details on the 

Basic Mode

 tab and 

Advanced Mode

 tab.

Basic Mode Tab
Advanced Mode Tab

1. Place the document on the Platen, then start ScanGear (scanner driver).

Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)

2. Set 

Select Source

 according to the document placed on the Platen.

356

Summary of Contents for E 400













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands