manualshive.com logo in svg

Canon E 400, Online Manual

Share
Download
Canon E 400 Online Manual Download Page 229

Print "Cut/Paste" lines in margins

Specifies whether to print cut lines that serve as guidelines for pasting together the pages into a
poster.
Check this check box to print the cut lines.

Print page range

Specifies the printing range. Select 

All

 under normal circumstances.

Select 

Pages

 to specify a specific page or range.

Note

• If some of the pages have not been printed well, specify the pages that do not need to be printed

by clicking them in the settings preview of the 

Page Setup

 tab. Only the pages shown on the

screen will be printed this time.

Booklet Printing dialog box

This dialog box allows you to set how to bind the document as a booklet. Printing only on one side and
printing a page border, can also be set in this dialog box.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.

Preview Icon

Shows the settings made on the 

Booklet Printing

 dialog box.

You can check what the document will look like when printed as a booklet.

Margin for stapling

Specifies which side of the booklet is to be stapled.

Insert blank page

Selects whether to print the document on one side or both sides of the booklet.
Check this check box to print the document on one side of the booklet and select the side to be left
blank from the list.

Margin

Specifies the width of the stapling margin.
The specified width becomes the stapling margin from the center of the sheet.

Page Border

Prints a page border line around each document page.
Check this check box to print the page border line.

Specify Margin dialog box

This dialog box allows you to specify the margin width for the side to be stapled. If a document does not fit
on one page, the document is reduced when printed.

Margin

Specifies the width of the stapling margin.
The width of the side specified by 

Stapling Side

 becomes the stapling margin.

Print Options dialog box

Makes changes to print data that is sent to the printer.

Depending on the type of printer driver you are using and the environment, this function may not be
available.

229

Summary of Contents for E 400













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands