110
Replacing Consumable Parts
The two rollers (feed roller and retard roller) installed in the scanner
are consumable parts. The feed roller and retard roller wear with
scanning. If the feed roller and retard roller are worn, documents may
not feed correctly and paper jams and double feeds may occur.
When more than 200,000 pages have been fed (total number of pages
fed by the scanner), a message prompting you to replace the rollers is
displayed when the computer and scanner are started.
Message that appears on the computer
Message that appears on the touch panel
Tap [OK] to move to the home screen.
The message that appeared on the panel can be cleared by resetting
the roller counter. Note that, it will always appear whenever the
scanner's power is turned on, until you reset the roller counter.
If this message begins to be displayed at startup, purchase an
exchange roller kit and replace the worn parts with the consumable
parts included in the kit (feed roller and retard roller).
for
details about the exchange roller kit.
Furthermore, the counter in the scanner that records the number of
pages fed also needs to be reset when you replace the rollers.
Hint
Even before it becomes time to replace the rollers, scanned images
may become stretched in the vertical direction due to wear of the
rollers. If this happens, adjust the reduction ratio.
䣑䣍
䣖䣱䢢䣯䣣䣫䣰䣶䣣䣫䣰䢢䣯䣣䣺䣫䣯䣷䣯䢢䣲䣧䣴䣨䣱䣴䣯䣣䣰䣥䣧䢮
䣶䣪䣧䢢䣥䣷䣴䣴䣧䣰䣶䢢䣴䣱䣮䣮䣧䣴䣵䢢䣵䣪䣱䣷䣮䣦䢢䣤䣧䢢䣴䣧䣲䣮䣣䣥䣧䣦䢢䣰䣱䣹䢰
䣒䣮䣧䣣䣵䣧䢢䣴䣧䣨䣧䣴䢢䣶䣱䢢䣶䣪䣧䢢䣫䣰䣵䣶䣴䣷䣥䣶䣫䣱䣰䣵䢢䣫䣰䢢䣶䣪䣧䢢䣗䣵䣧䣴䢢䣏䣣䣰䣷䣣䣮䢰
䣙䣣䣴䣰䣫䣰䣩
