background image

65

5

Appen

d

ix

Weight

Approximately 90.4 lb (41 kg)

Power Requirement

AC 120 V (60 Hz), 1.8 A (max)
AC 220-240 V (50/60 Hz), 1.2 A (max)

Power Consumption

120 V model

Operating:  218 W maximum
Standby: 

Under 3.5 W

220-240 V model Operating:  210 W maximum

Standby: 

Under 4.3 W

Noise

Less than 72 dB

Operating Environment

Temperature: 59°F to 86°F (15°C to 30°C)
Humidity:

25% to 80% RH 

• You can use the functions noted above if the software 

supports them. 

• They may not work depending on your computer’s 

capabilities and the software you are using. 

Specifications are subject to change without notice.

Options

Stamp Unit

Stamps a mark on the surface of a document to indicate 
it has been scanned. (See “Stamp Unit” on p. 14.)

Consumables

Stamp Cartridge

For replenishing the stamp unit.

Cleaning paper

Cleaning paper that is attached to the cleaning tool and 
used to clean the scanning area inside the feeder.

• For details about options and consumables, contact your 

sales representative or your service representative.

Summary of Contents for DR 7090C - imageFORMULA - Document Scanner














































































Reviews: