Chapter 3
Basic Operation
3-5
3-3 Placing Documents
There are two methods for feeding documents, the Page Separation mode and Bypass mode.
Feeding pages continuously from a stack of documents placed in the feed tray is called the Page
Separation mode. Feeding documents one sheet at a time or feeding documents consisting of
multiple pages that are attached, is called the bypass mode. The document feed method can be
changed by moving the feed selection lever.
IMPORTANT
• Always smooth out any folds or curls in your documents before placing them into the feeder.
If the leading edge of a document is curled, it may cause a paper jam.
• When continuously scanning documents on thin paper in the page separation mode, the
pages may become wrinkled or folded and cause a paper jam. If this happens, scan the
document in the bypass mode.
CAUTION
■
Before you place a document, check to make sure it does not contain paper clips,
staples, or other small metal objects. These items may cause a fire or electrical
shock, damage the document, or cause a paper jam or scanner malfunction.
■
Do not wear loose clothing or jewelry that may get caught in the scanner while you
are using it. This may result in personal injury. Be extra careful of neckties and long
hair. If anything gets caught in the scanner, immediately turn OFF the power switch,
and disconnect the power cord from the power outlet to stop scanning.
Feeding in the Page Separation Mode
1
Push the feed selection lever down (
.)
2
Fan the pages of the document to be scanned and align their edges.
Summary of Contents for DR-4010C - imageFORMULA - Document Scanner
Page 3: ......
Page 6: ...Document Scanner User Manual Hardware ...
