background image

16

Placing Cards into the Business Card 
Feeder

1

Open the business card feeder.

2

Hold down the lever (

A

) on the side of the business card 

feeder, and place the cards into the feeder with the 
scanning side facing up. Fully insert the cards until they 
reach the stoppers (

B

) at the back of the feeder.

3

Close the business card feeder when scanning is 
finished.

IMPORTANT

• When the business card feeder is open, only the Business Card and 

Auto-detection options are available for the paper type 
configuration under the driver settings. In addition, documents 
loaded into the feeder cannot be scanned. 

• Open and close the business card feeder gently. Excessive force 

may result in damage to the business card feeder.

• Precautions for using the business card feeder are the same as 

those for the feeder. (See p. 13.)

• Close the business card feeder when it is not in use.

• Business cards are ejected in reverse order after scanning from the 

business card feeder.

• Scan plastic cards on the flatbed.

When the Scanner Is in Sleep Mode

When the scanner is not operated for a specific amount of time, it 
automatically enters the sleep mode. The scanner automatically exits 
the sleep mode if you initiate scanning from a computer. However, to 
initiate scanning from the scanner’s operation panel, you must exit the 
sleep mode manually.
To exit the sleep mode manually, press the POWER button on the 
operation panel. The scanner exits the sleep mode.

Summary of Contents for DR-2020U - imageFORMULA - Document Scanner









































Reviews: