Setting Up
15
E
ng
lis
h
Turning on the Main Unit's power
1 Plug the provided AC power cord to the AC power supply input terminal at the rear.
• The video display goes into standby and the power indicator lights up in amber.
2 Press the power supply button at the front.
• The power indicator lights green.
Note
• Warming-up is necessary to stabilize the brightness of the video display. Wait at least 10 minutes after turning on the power before
use.
Basic operations to use the OSD menu
The video display settings are changed from the OSD menu. Using buttons and jog dial on the video display, you can
adjust image quality and configure settings for input signals.
MENU button
Opens/closes the OSD
menu, or moves up one
level in a menu.
RESET button
Resets the items to be adjusted using the slider and
entered characters.
Jog dial
or rotation: Used to move to a different item and change
settings.
Press: Confirms settings or moves the selection frame up/down 1 level.
