Canon DP-V2420, Instruction Manual

Page: 49 / 108

49 OSD Menu
Channel Settings
This menu is used for input related settings. Select the "Select Channel" and choose a channel number from CH1 to
CH30. Finally define the parameter of each of the "Channel Settings".
Item Setting Options
Select Channel Display the channel number. In addition, you can assign each content of "Channel Settings" to each
channel (
51).
CH1
to
CH30
Note
• It may take 10 seconds when switching channels.
Input Configuration Select the input. Factory default depend on the channel ( 51).
3G/HD-SDI, 3G-SDI RAW, SD-SDI, HDMI, — (Not set)
Select Input Signal Sets the signal display method ( 19).
Automatic : The display method is automatically determined to match the input signal.
Quad Input : Four input signals (Input A to Input D) are displayed.
Dual Input A,B : Two input signals (Input A terminal and Input B terminal) are displayed.
Dual Input C,D : Two input signals (Input C terminal and Input D terminal) are displayed.
Single Input A, Single Input B, Single Input C, Single Input D : One input signal (any of Input A
to Input D) is displayed.
Note
• Settings that can be set differ according to the input signal.
-
SD-SDI: Only "Single Input A to Single Input D" can be selected.
-
HDMI: This is fixed to "Automatic".
-
"Dual Input" can be set in the case of 3G/HD-SDI or 3G-SDI RAW.
Image Division Sets the display method when "Input Configuration" is set to "3G/HD-SDI" and "Select Input Signal"
is set to "Quad Input" or "Dual Input." Two division methods "Square Division" and "2 Sample
Interleave" are supported for 4K video signals.
■
"Quad Input"
Automatic : Automatically determined based on payload and displayed.
Square Division : Displays a signal transmitted over four inputs as a single image.
2 Sample Interleave : Displays a signal transmitted divided into a 2K/HD signal as a single image.
Multi View (Quad) : Displays the video of each of the four inputs in four screens.
■
"Dual Input A,B" or "Dual Input C,D"
Automatic : Automatically determined based on payload and displayed.
Square Division : Displays a signal transmitted over four inputs as a single image.
2 Sample Interleave : Displays a signal transmitted divided into a 2K/HD signal as a single image.
Dual Link 3G-SDI : Displays a Dual Link 3G-SDI signal as a single image.
Multi View (Dual) : Displays the video of each of the two inputs (Input A,B or Input C,D) in two
screens.
Select Input Signal: Quad Input, Image Division: Square Division