OSD Menu
78
Sub Menu
Setting Options (Bold: factory default)
Firmware Update
This function is used to update the video display firmware. Refer to the Canon website for detailed
information.
Export/Import
6
Sets the export/import main menu settings.
Export
Target
USB
User 1 to User 3
Select the export destination.
[USB]: Export to a USB memory.
[User 1] to [User 3]: Export to the built-in memory of the main unit.
Filename
Factory default is "dinfo_dpv2411.dat". You can change the name of the
file to be exported to the USB memory within 16 one-byte characters
including alphabetical characters, numbers, and symbols.
Execute
Performs export.
Import
Target
USB
User 1 to User 3
Specify the save destination for the file to be imported.
Filename
Displays files with the extension ".dat" so you can select from among
them.
Settings
All
Adjustment
Channel Settings
Display Settings
Audio Settings
Marker Settings
Function Settings
System Settings
Select the settings to import.
Execute
Performs import.
Power on Setting
Last memory
User 1 to User 3
You can select the state of the display when the power is turned on.
[Last memory]: The video display starts up with the settings last used.
[User 1] to [User 3]: It starts up with the settings saved in [User 1] to [User 3]
under [Export].
Reset All Settings
OK
Cancel
Returns all settings to factory default. When selected, the message [Reset
all settings to factory defaults?] appears.
[OK]: Performs reset.
[Cancel]: Returns to the previous screen without resetting.
