Turning on the Power
19
Attaching/detaching the HC-01 AC Power Cord Clamp (provided)
Attaching
Install the AC power cord clamp before connecting the AC power cord to the main unit.
1 Insert the AC power cord clamp connector into the cord clamp
mounting hole (
1
).
2 Connect the AC power cord to the main unit (
2
).
3 Secure the AC power cord in place with the holder (
3
).
•
The holder should always be fastened in the position as shown in the
illustration.
4 Press the holder against the main unit (
4
).
•
Make sure that there is no slack (
A
).
•
Pulling the holder lock lever in the direction of the arrow will allow you to
adjust the holder position (
5
).
Detaching
1 Pull the holder lever in the direction of the arrow (
6
) and remove the
AC power cord clamp from the AC power cord.
2 Press the knobs on the left and right and pull out the AC power cord
clamp from the video display (
7
).
2
1
3
4
A
5
6
7
