10
Nomenclature
■
Back face of the main unit
A
q
A
a
A
s
A
d
A
f A
g A
h
A
q
Carrying handle
Used to install, connect, or carry the unit.
A
a
HDMI input terminal
Used to input HDMI signals.
A
s
LAN (10/100 BASE)
terminal
Connection for a Display Controller CL-01 (separately sold) or other equipment.
–
A
d
3G/HD-SDI output
terminal
Pass through output corresponding to 3G/HD-SDI input terminal.
–
A
f
3G/HD-SDI input
terminal
Used to input SDI signals.
A
g
DC power input
terminal
Connection for DC power supply.
A
h
AC power input
terminal
Connection for the provided AC power supply cord.
CAUTION
• When connecting an external sensor for calibration to the USB port, cable length must not exceed 3 m. Otherwise,
communication error may occur and correct calibration may not be possible.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when
connecting peripheral devices.
• Pass through SD-SDI signals are not output correctly.
Note
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. If the function to save data on a USB memory is
executed during recognition, the message "Detecting USB memory" is displayed.
