Canon DADF-P1, Service Manual

Page: 69 / 90

Chapter 3
3-29
F-3-184
3.5.1.11 Removing the Read Roller 2
0011-3735
1) Remove the two screws [1], and then detach the cover [2].
F-3-185
2) Remove the resin ring [1], gear [2], and bearing [3].
F-3-186
3) Remove the resin ring [1], belt [2], gear [3], and bearing [4], and then
remove the read roller 2 [5].
When installing the read roller 2, loosen the screws [6] and attach the
belt.
F-3-187
3.5.1.12 Removing the Sensor in the Feeder Unit
0010-4213
1) Remove the two screws [1], and then remove the sensor unit [2].
F-3-188
2) Remove the sensor [1] from the sensor unit.
F-3-189
3.5.2 Document Width Volume
3.5.2.1 Removing the Relay PCB (Document Width
Sensor PCB)
0010-6586
1) Remove the three screws [1] on the reverse side of the document tray us-
ing the stubby driver, and then detach the cover [2].
F-3-190
[4] [3] [1]
[2]
[5]
[1]
[2]
[1] [2] [3]
[1] [3] [4] [6]
[2] [5]
[1]
[2]
[1]
[1]
[2]