Canon DADF-N1, Service Manual

Page: 99 / 199

Chapter 3
3-27
F-3-93
7) Remove the E-ring [16], retaining ring
[17], 3 gears [18], and then detach 3
timing belts [19] and the parallel pin
[20].
F-3-94
8) Remove the resin E-ring [21], pulley
[22], and belt [23]. Before removing the
pulley [24], you need to remove the
feeding unit.
F-3-95
Loosen the screw [26] of the tension
arm [25]; then, force the arm clockwise
to mount it. When you have attached the
timing belt [23], tighten the screw [26].
F-3-96
3.4.5.9 Removing the
Feeder Unit
0007-1631
1) Remove the screw [1], and pull out the
busing [2]; then, detach the original
pickup tray [3].
[14]
[15]
[17] [19]
[19]
[18]
[18]
[18]
[16]
[20]
[22]
[21]
[24]
[23]
[23]
[25]
[26]