Canon DADF-N1, Service Manual

Page: 118 / 199

Chapter 3
3-46
F-3-169
3.4.7.11 Removing the
Read Roller 1
0007-1655
1) Remove the resin E-ring [1], and detach
the pulley [2], timing belt [3], and
bushing [4].
F-3-170
2) Remove the resin E-ring [5], and detach
the pulley [6], and the bearing [7].
F-3-171
3) Remove the 2 resin E-rings [8], and
detach the reader roller 1 [9] as shown in
the figure.
Be sure to pull out the roller while
keeping the sensor flag [12] out of the
way.
The platen roller [10] will come off
together with the arm when the read
roller 1 [9] is removed; take care not to
misplace the spring [11] of the arm.
F-3-172
When mounting the platen roller
pressure spring (left, right) [13], be sure
[1]
[2]
[1] [2] [3] [4]
[7]
[6]
[5]
[8]
[11]
[10] [12]
[8]
[9]
[11]