4
4
4-8
4-8
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points (DADF) > Replacing the Stamp
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points (DADF) > Replacing the Stamp
Removing the Separation Pad
1)Open the feeder cover.
2)Remove two hooks to remove the separation pad.
x2
NOTE:
When replacing the consumable parts, be sure to clear the parts counter.
(Lv1.COPIER > COUNTER > DRBL-2 > DF-SP-PD)
F-4-16
F-4-17
Replacing the Stamp
1)Open the feeder cover and separation guide.
2) Using tweezers, remove the stamp
3)Using tweezers or the like, attach a new stamp.
Be sure to attach the new stamp with the stamp face up.
4)Close the feeder cover and separation guide.
CAUTION:
If the stamp is floating, a jam can occur. Be sure to push in the stamp until it clicks.
NOTE:
When replacing the consumable parts, be sure to clear the parts counter.
(Lv1.COPIER > COUNTER > DRBL-2 > STAMP )
F-4-18
Summary of Contents for DADF-AG1
