Canon DADF-AG1 Service Manual Download Page 6

Page: 6 / 68

0-6

Clutch Solenoid Motor Fan PCB (DADF) ----------------------------- 4-10

Adjustment

Overview (DADF) -------------------------------------------------------------5-2

Outline -------------------------------------------------------------------------------- 5-2

Adjustment Method (DADF) ------------------------------------------------5-3

Preparation or Creation of Test Chart ----------------------------------------- 5-3
Adjusting the Height --------------------------------------------------------------- 5-3

Adjusting the Tray Width --------------------------------------------------------- 5-6

AB-Configuration Adjustment ------------------------------------------------------------ 5-6
Inch-Configuration Adjustment ---------------------------------------------------------- 5-6

Adjusting the Perpendicularity -------------------------------------------------- 5-6
Adjusting the Read Position ----------------------------------------------------- 5-7
Adjusting the Horizontal Registration ----------------------------------------- 5-8
Adjusting the Trailing Edge Registration ------------------------------------- 5-8

Adjusting the Magnification ------------------------------------------------------ 5-9
Adjusting the White Level -------------------------------------------------------- 5-9

Installation

How to Utilize This Installation Procedure ------------------------------6-2

When using the parts included in the package ----------------------------- 6-2
Symbols in the Illustration ------------------------------------------------------- 6-2

Confirmation before the installation --------------------------------------6-3

Check Items when Turning OFF the Main Power-------------------------- 6-3

Unpacking and Checking the Components -----------------------------6-4

Unpacking and Checking the Contents -------------------------------------- 6-4

Installation Procedure --------------------------------------------------------6-5

Installing the DADF ---------------------------------------------------------------- 6-5
Affixing Labels ---------------------------------------------------------------------- 6-6

Others ----------------------------------------------------------------------------6-7

Attaching the Hinge Covers ----------------------------------------------------- 6-7
Cleaning the Stream Reading Glass ------------------------------------------ 6-7

Others ----------------------------------------------------------------------------6-8

Installing the Stamp(Option for ADF) ----------------------------------------- 6-8
Checking the Operation ---------------------------------------------------------- 6-8

Operation Check ---------------------------------------------------------------------------- 6-8

Appendix

Service Tools (DADF) -----------------------------------------------------------ii

Solvents and Oils ------------------------------------------------------------------------------ ii
Special Tools ------------------------------------------------------------------------------------ ii

Signal Name List (DADF) ----------------------------------------------------- iii

Signal Name List -------------------------------------------------------------------------------iii

General Circuit Diagram (DADF) --------------------------------------------iv

General Circuit Diagram (1/1) -----------------------------------------------------iv

Summary of Contents for DADF-AG1





































































Search results

Summary of Contents for DADF-AG1

Reviews:

Canon DADF-AG1, Service Manual, Page: 6 / 68

Search results

Summary of Contents for DADF-AG1

Reviews: