Canon DADF-AA1, Service Manual

Page: 88 / 110

Chapter 5
5-2
3) Using tweezers or the like, attach a new stamp.
Be sure to attach the new stamp with the stamp face up.
F-5-3
4) Close the feeder cover and separation guide.
5.2 Maintenance and Inspection
5.2.1 Periodically Replaced Parts
5.2.1.1 Periodically Replaced Parts
0024-7046
This machine does not have parts that must be replaced periodically.
5.2.2 Durables
5.2.2.1 Durables
0024-7047
Some parts must be replaced due to deterioration or damage at least once within the warranty period. The following tale lists the expected average lives (number
of document sheets supplied) of the parts that requires replacement when they become defective.
The number of document sheets that have been fed can be checked in the service mode of the host machine.
If the stamp is floating, a jam can occur. Be sure to push in the stamp
until it clicks.
As of March, 2008
No
.
Part name Part No. Quantity Expected life Remarks
1 Pickup roller FM3-6892 1 80000 sheets The number of document sheets that
have been fed can be checked in the
service mode of the host machine.
2 Separation pad FL2-9942 1 80000 sheets
3 Feed guide (dust
collection tape) FL2-9935 1 40000 sheets
4 Stamp (Option) FC7-5465 1 7000 sheets Replace it when the stamp image
becomes faint.
The numbers of sheets listed above are estimated ones, so they may change with the experimental data.