Canon D500 Series, Service Manual, Page: 111 / 255

4
4
4-48
4-48
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Motor Unit
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Motor Unit
Before Removing the DADF Motor Unit
1) Remove the left cover. (Duplex models) (Refer to page 4-31)
2) Remove the DADF unit and reader unit. (Refer to page 4-40)
3) Remove the DADF unit. (Refer to page 4-42)
4) Remove the DADF pickup unit. (Refer to page 4-44)
Removing the DADF Motor Unit
1) Disengage the 2 connectors [1] and the grounding terminal [2] from the DADF
communication cable.
• 1 screw [3]
• 1 edge saddle [4]
• 1 harness guide [A]
[4]
[3]
[A]
[2]
x2
[1]
F-4-88
2) Remove the DADF motor unit [1].
Caution:
Gently remove the DADF motor unit to prevent the gear phase from becoming
displaced.
• 1 screw (binding) [2]
• 1 screw (tapping) [3]
x2
[1] [2]
[3]
Note:
The state of the detached DADF motor unit is shown below.
F-4-90
F-4-89