![background image](http://html.mh-extra.com/html/canon/d-45p/d-45p_user-manual_62447062.webp)
EN-18
Menu operation (continued)
Menu Options
Set the following options provided in the respective menus.
1. QUICK MENU
•
You cannot adjust COLOR TEMP. when WALL SCREEN is set to other than OFF.
•
When COLOR ENHANCER is switched, projected images may be distorted.
•
By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected,
and you cannot switch the LAMP MODE in about one minute after the lamp is on.
2. INFORMATION menu
Menu option
Setting
Feature description
COLOR ENHANCER
AUTO
Automatically sets an optimal color balance based on the input signal.
Use this setting for most cases.
PRESENTATION
Makes projected images bright and crisp.
STANDARD
Makes projected images look natural.
THEATER
Makes projected images soft and smooth. Best suited for movies.
USER
Reflected by the value set in IMAGE menu. (See page 25.)
CONTRAST
±
30
Adjusts the contrast of projected images. (See page 25.)
BRIGHTNESS
±
30
Adjusts the brightness of projected images. (See page 25.)
COLOR TEMP.
4 options
Adjusts the color temperature. You cannot select this setting when
WALL SCREEN in the INSTALLATION menu is set to a setting other
than OFF. (See page 25.)
SHARPNESS
±
5
Adjusts the sharpness of projected images. (See page 25.)
LAMP MODE
STANDARD
Select this setting when you want to view images in a well-lit room.
LOW
Select this setting when you want to view images at a moderate light
intensity. The operating sound is consequently reduced, and the lamp
lifetime becomes longer.
•
When this mode is switched, projected images may flicker.
•
If this mode is frequently switched, the lamp may be deteriorated.
ASPECT
NORMAL
Automatically sets the aspect ratio in relative to the input signal. Use this
setting for most cases.
16:9
Selects a desired screen position for anamorphically squeezed or hori-
zontally compressed images stored on DVD disks.
FULL
Select this setting when you want to project images in the full screen.
USER MENU
Displays the menu item selected in SELECT USER MENU.
SELECT USER MENU
Select the item to display in USER MENU.
DETAIL MENU
Moves to DETAIL MENU.
Menu option
Feature description
LAMP TIME (LOW)
This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
•
When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than
the actual time. (See page 34 for the interval of lamp replacement.)
•
When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating
time exceeds 10 hours, the actual hours are displayed.
•
When the lamp operating time reaches 3750 hours, the bar turns yellow. When it reaches
4750 hours, the bar turns red.
(The lamp lifetime is 5000 hours.)
INPUT
Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION
Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY
Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-
QUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE
Indicates the type of the sync signal for the currently projected video signal.
DETAIL MENU
SELECT
USER MENU
ASPECT
USER MENU
NORMAL
OK
COLOR
QUICK MENU
CONTRAST
BRIGHTNESS
0
0
STANDARD
STANDARD
0
COLOR TEMP.
SHARPNESS
AUTO
COLOR
ENHANCER
LAMP MODE
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE
5wire
60.02 KHz
75.04 Hz
1024x768
COMPUTER2
0 H
R
G
H
V
B
INFORMATION
Summary of Contents for D-45P
Page 44: ...KO 44 1577 3037 02 851 0371 ...
Page 86: ...EN 42 1577 3037 02 851 0371 ...
Page 87: ...MEMO ...
Page 88: ...MEMO ...