Canon CXDI-1, Operation Manual

Page: 69 / 170

6. Browsing Completed Studies (Study List)
– 61 –
6.5.2 Resending the Study Images
Follow the procedure below to resend all the images contained in a study.
1
Open the RESEND ALL window.
Touch [RESEND ALL] .
RESEND ALL Window
2
Select the device for sending the image.
Touch [ON]/[OFF] next to the name of the destination and select [ON] for the device for
sending the image.
However,
[ON]/[OFF] will not be displayed for devices that have not been set as the
output destination (
→
Setup Guide) .
3
Set the priority.
Each time you touch [Priority], the button switches between highlighted display (white
characters) and normal display. The selected study is given output priority when this
button is highlighted.
4
Resend the study.
Touch [RESEND ALL] .
If all images contained in a study are rejected
If you touch [RESEND] or [RESEND ALL] after all images contained in a study were
rejected (
→
page 40) , a window will open and the confirmation message “ All the
selected images are the rejected images. They can only be sent to the internal
storage. Do you want to continue?”
will be displayed.
If you touch [OK] , the IMAGE DESTINATION window will open and you will be
able to make the [ON] / [OFF] setting to select internal storage as the output destination.