Canon CXDI-1, Operation Manual

Page: 111 / 170

Continued on the following page >>
– 103 –
9. Self test
This procedure checks the image data transfer path of the CXDI system and individual sensor
performance within the sensor unit.
9.1 Self test using a sensor unit with a removable grid unit
1
This displays the Self Test Screen.
From the exposure screen, touch [SYSTEM] > [SELF TEST] .
Self Test Screen
2
Select the sensor unit.
If multiple sensor units can be used, first select a sensor unit by touching that sensor unit
button.
3
Remove the grid unit.
If a sensor unit with removable grid unit is selected in step 2 , remove the grid unit.
If [TEST START] is touched while the grid unit is attached, it will display an error, and
the self test cannot be performed.