manualshive.com logo in svg

Canon CX-G2400, User Manual

Share
Download
Canon CX-G2400 User Manual Download Page 141

136

Chapter 3  Maintenance

 

■

 Cleaning the  Transport Belt

IMPORTANT

•  Administrative privileges over this printer are required to configure printer settings.

If a user without administrative privileges proceeds with configuration of settings, a message ”You do not have 
rights to printer management. Please contact your system administrator.” appears.
For more details, see

 “Administrative privileges required for certain features (P.40)”

.

•  When printing is in progress or an error has occurred, [Belt Cleaning Mode] cannot be executed.

1 

Open the properties window of the printer.

 (P.32)

2 

Perform belt cleaning.

2

1

1.   Click the [Utility] tab.

2.  Click [B elt Cleaning Mode].

 

A confirmation message will appear.

3

3. Click [Yes].

Summary of Contents for CX-G2400



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands