manualshive.com logo in svg

Canon CRL3124N, Instruction Manual

Share
Download
Canon CRL3124N Instruction Manual Download Page 322

322

You can either select and erase unnecessary images one by one or 
erase them in one batch. Protected images (p.320) will not be erased.

Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a RAW+JPEG image will erase both the RAW 
and JPEG images.

1

Play back the image to be erased.

2

Press the <

L

> button.

X

The Erase menu will appear at the 
bottom of the screen.

3

Erase the image.

 

Select [

Erase

], then press <

0

>. The 

image displayed will be erased.

By appending checkmarks <

X

> to the images to be erased, you can 

erase multiple images at one time.

1

Select [Erase images].

 

Under the [

3

1

] tab, select [

Erase 

images

], then press <

0

>.

L

 Erasing Images

Erasing a Single Image

3

 Checkmarking <

X

> Images to Be Erased in a Batch

Summary of Contents for CRL3124N





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands