manualshive.com logo in svg

Canon CRL3124N, Instruction Manual

Share
Download
Canon CRL3124N Instruction Manual Download Page 247

247

You can magnify the image and focus precisely with manual focus.

1

Set the lens focus mode switch to 
<MF>.

 

Turn the lens focusing ring to focus 
roughly.

2

Display the magnifying frame.

 

Press the <

u

> button.

X

The magnifying frame will appear.

 

You can also tap [

u

] on the screen to 

magnify the image.

3

Move the magnifying frame.

 

Press <

9

> to move the magnifying 

frame to the position where you want 
to focus. You can also tap it to move 
it.

 

To return the magnifying frame to the 
center, press <

0

> or <

L

> button.

4

Magnify the image.

 

Each time you press the <

u

> button, 

the magnification within the frame will 
change as follows:

 

While in magnified view, you can use 
<

9

> to scroll around in magnified 

view.

MF: Focusing Manually

Magnifying frame

AE lock

Magnified area position

Magnification

1x 

9

 5x 

9

 10x 

9

 Normal view

Summary of Contents for CRL3124N





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands