Canon CRL3124N, Instruction Manual

Page: 190 / 468

D
Using the Built-in Flash
190
Using the red-eye reduction lamp before flash photography can reduce
red eye.
Red-eye reduction will function in any shooting mode except <
7
>,
<
3
>, <
5
>, and <
G
>.
1
Select [Red-eye reduc.].
Under the [
z
2 ] tab, select [ Red-eye
reduc. ], then press <
0
>.
2
Select [Enable].
Select [ Enable ], then press <
0
>.
For flash photography, when you
press the shutter button halfway, the
red-eye reduction lamp will light up.
Set flash exposure compensation if the flash exposure of the subject
does not come out as desired. You can set flash exposure
compensation up to ±3 stops in 1/3-stop increments.
1
Press the <
Q
> button.
(
7
)
X The Quick Control screen will appear.
3
Red-eye Reduction
y
Flash Exposure Compensation
N
The red-eye reduction feature is most effective when the subject looks at
the red-eye reduction lamp, when the room is well lit, or when you are
close to the subject.
When you press the shutter button halfway, the scale
display on the bottom of the viewfinder will shrink and
turn off. For best results, take the picture after this
scale display turns off.
The effectiveness of red-eye reduction varies depending on the subject.