A1 Head
Triangular glue tab
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Pencil
Scissors line
Mountain fold
Valley fold
Glue spot
Parts No.
Notation Key
Tools
Glue tab
Parts name
Scissors line
Parts No.
Reindeer : Assembly Instructions
Page
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
marks a basic assembly technique that remains the same
regardless of the part.
Instructions are printed only for the first instance.
Assemble the head and antlers
Use pattern: Page2 to Page4.
Cut along the line marked
.
Cut out A1 by cutting along the lines.
A1 Head
Make a mountain fold and valley fold on A1.
Trace along the mountain fold and valley fold line with a
stencil pen, scoring it to make it easier to fold.
The parts will be easier to assemble if curled.
Using the photo as a guide, move your fingers in the direction of the
arrow, adjusting the pressure to curl the paper.
Attach the triangular glue tabs so that the front side becomes convex.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.
The Assembly instructions are divided into three blocks: A (head,
antler), B (front legs, body), and C (waist, hind legs, stand). Follow
the instructions for each block to assemble your reindeer.
