Pop-up Card (Halloween / Black cat & Witch) : Assembly Instructions
Katsuyuki Shiga(PinoArt)
Canon Inc.
Page
Notation Key
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Scissors line
Mountain fold
Valley fold
Glue spot
Tools
Numbers of parts
to be attached
Parts No.
Glue reverse side
Assemble the card
Use pattern: Page2, Page3.
Cut out A1 by cutting along the lines.
Cut along the line marked .
Scissors line
Mountain fold
Parts No. / Parts name
Make a mountain fold on A1.
Trace along the mountain fold line with a stencil pen, scoring it
to make it easier to fold.
Using the photo as a guide, attach in the direction of the arrow.
Attach A1 and A2, and the card is complete.
Check that A1 and A2 are the right way up,
place some paste on the blue area of the
back side, and attach them together.
The Assembly instructions are divided into three blocks:
A (Card), B (Jack-o'-lantern) and C (Decorations, Black cat and
Witch ).
Follow the instructions for each block to assemble your card.
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
