Canon CREATIVE PARK Komatsu Dump truck, Manual

Page: 1 / 34

Parts list (pattern): Twenty-two A4 sheets (No. 1 to No. 22)
No. of Parts: 104
Build this model with careful reference to the Assembly Instructions.
Editor:
View of completed model
* This model was designed for Papercraft
and may differ from the original in some respects.
Special Vehicle Series : 04
Pattern
Dump truck Dump truck
Load capacity (max.) :
Overall length :
Overall width :
Overall height :
91.0 ton
10,290 mm
6,885 mm
5,050 mm
Large-scale off-road dump trucks are mostly used to transport earth and sand. While in
Japan only dump trucks with load capacities of up to 11 tons can drive on ordinary
roads, there is no restriction on the load capacities of off-road dump trucks used on
large-scale civil engineering and construction sites and in locations such as mines and
quarries. Larger models can carry loads of as much as 300 tons. The HD785-7 has a
load capacity of 91 tons, and huge wheels over two meters high.
* If you prefer that the rear sides of the paper parts not be white,
print the two optional reverse-side printing sheets on thin paper
such as standard printer paper and adhere these to the reverse
sides of sheets No. 19 and No. 20 using spray adhesive, then
build the model as described in the instructions.
1/43 scale