31
Configuration of the Settings Page
The configuration of the Settings Page is as follows:
Header
This area is common to all Settings Pages.
(1)
Model Name
Displays the model name of the connected camera.
(2)
Tally Lamp
S
tatus Display
Displays the video distribution status with the Tally Lamp.
: Distributing
: Preparing for distribution
: No distribution
(3)
Power ON/
S
tandby
Switches between the camera on and standby mode. Set it to standby mode if needing to stop HDMI/SDI output
or IP distribution of videos.
If
is clicked while the camera is on, "This will switch to standby. Do you want to continue?" message will
appear. Click [OK] and "On Standby" will appear in the video display area and will go into standby mode. Click
[Start Up] to return to the power on state.
The Status of the camera can be confirmed by the POWER lamp at the rear of the camera (P. 13).
(4)
Menu
Click to display a list of items in the settings area.
For details of the items, refer to "Settings area" (P. 32).
(1)
(2)
(4)
(6)
(7)
(9) to (17)
Header
Video display/
operation area
S
ettings area
(5)
(8)
(3)
