Canon CR-X300 User Manual Download Page 11

Page: 11 / 114

Types of User Manuals

The following describes the different types of user manuals. When instructed to reference another manual, its name will be

listed as shown below.

How to Use This Document

The assumed reading format of this document is on a computer screen.



Notes

1 Any unauthorized reproduction of this document is prohibited.

2 The contents of this document are subject to change without any prior notice.

3 This document has been prepared with the utmost attention to accuracy. If you have any comments, however,

please contact a Canon sales representative.

4 Canon shall assume no liability for any outcome of using this product, notwithstanding items 2 and 3 above.



Software Screenshots

The software screenshots samples shown in this document are for illustration only. The screenshots may differ from

the actual screens displayed.

Descriptions use sample screens when connected to the camera, with Windows 10 for the operating system and

Google Chrome for the web browser.



Symbols Used in This Document

User Manuals

Important Information (included)

Explanation on safety precautions and downloading information from the Canon website.

User Manual (this document)

Explanation on procedures for installing and connecting the camera, settings on the Settings Page, troubleshooting, and

major specifications.

Remote Camera Control Application User Manual

Explanation on the details on how to use the Remote Camera Control Application.

Remote Camera Controller RC-IP100 User Manual

Explanation on the details on how to use the Remote Camera Controller RC-IP100.

ymbol

Meaning

Important

Cautions and restrictions. Make sure to read these carefully.

Notes

Supplementary descriptions and reference information.

Summary of Contents for CR-X300



















































































































Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands

Canon CR-X300, User Manual

Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands