20
Configuration of the Settings Page
The configuration of the Settings Page is as follows:
Header
This area is common to all Settings Pages.
(1)
Model Name
Displays the model name of the connected camera.
(2)
Tally Lamp
S
tatus Display
Displays the video distribution status on the Tally Lamp.
: Distributing
: Preparing for distribution
: No distribution
(3)
Power ON/
S
tandby
Switches between the camera on and standby mode. Set it to standby mode if needing to stop HDMI/SD output
or IP distribution of videos.
If
is clicked while the camera is on, "The camera will switch to standby. Are you sure?" message will appear.
Click [OK] and "On Standby" will appear in the video display area and will go into standby mode. Click [Start Up]
to return to the power on state.
The power lamp on the front of the camera is as follows:
On (green): Power on
ON (orange): Standby
Blinking (orange): Standby resuming
(4)
Menu
Click to display a list of items in the settings area.
For details of the items, refer to the "Settings Area" (P. 21).
(1)
(2)
(4)
(6)
(7)
(9) to (16)
Header
Video display/
operation area
S
ettings area
(5)
(8)
(3)
