Canon CR-N300, Settings Manual

Page: 94 / 119

94
S 360 Audio Video synchronize error [err]
S 430 Temperature sensor failure [crit]

Audio server error
B301 Audio device error [err]
B402 Audio server initialization failed [err]
B403 S ettings change failed [err]

Video error
V400 Video input initialization error [crit]
V401 Video input command error [crit]
V402 Video input frozen [crit]

Standard communication (IP)
error
D401 S tandard communication (IP)
initialization failed [crit]
Description Audio Video synchronize error. (S360)
Meaning Video/Audio synchronize error
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
Description cannot get temperature (S430)
Meaning Cannot get the temperature from the
temperature sensor.
Countermeasure If the error is still detected after
rebooting, it may be a failure of the
board, so contact the dealer.
Description cannot use audio device for %1
[%2:%3] (B301)
%1 Send/Receive type (rx | tx)
%2 Error type (open | write | flush)
%3 Error number
Meaning Detected an error in the audio device.
Countermeasure If the error is still not cleared, contact
the dealer.
Description wvaudio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized.
The audio server stops.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The
audio server stops.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
Description video %1 initialization failure - %2 (%3)
(V400)
%1 Video number
%2 Process description
%3 Error details
Meaning The video input function was stopped
because the video input system could
not be initialized.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
Description video command error - %1 (V401)
%1 Procedure details
Meaning The video input function was stopped
because a video input command could
not be processed. Or, it may not
operate in the desired setting.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
Description video %1 stalled (V402)
%1 Video number
Meaning The video input function was stopped
because the video input from the
camera stopped.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
Description Standard Com initialization error[%1]
(D401)
%1 Error number
Meaning Standard communication (IP) could not
be initialized.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.