Canon CR-N300 Page 81 Settings Manual Download

Page: 81 / 119

[Network

ettings and Management Information]

When set to [Save], initialization will be performed except for the following settings.

• Network Settings

• NTP Server

• HTTP Server

• Host Access Restrictions

• Time Zone

• Certificates

• SSL/TLS

• Administrator Name

• Administrator Password

When set to [Do not save], initialization will be performed all the settings excluding camera's date and time.

Since the network settings will be initialized, connection to the camera will not be enabled. Use the Camera Search Tool to

configure the initial settings.

Note

Even if the [Network Settings and Management Information] is set to [Save], the [Wireless LAN] setting will be initialized.

[Restore Default

ettings]

After rebooting, follow the selection in [Network Settings and Management Information] to restore the default settings.

Note

• Before clicking [Execute] in [Restore Default Settings], it is recommended to back up the current settings.

• It is possible to restore the factory default settings by using the RESET switch, but be aware that all the settings except the camera date

and time will be restored to the factory default settings (P. 100).

Summary of Contents for CR-N300
























































































































Search results

Summary of Contents for CR-N300

Reviews:

Related manuals for CR-N300

Brands by name

Popular brands

Canon CR-N300, Settings Manual

Search results

Summary of Contents for CR-N300

Reviews:

Related manuals for CR-N300

Brands by name

Popular brands