Canon CR-N300 Page 77 Settings Manual Download

Page: 77 / 119

If the NTP server address can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server

address acquired from the DHCP server (IPv4) will be used.

[

ynchronization Interval (minutes)]

Enter the query interval for the specified NTP server.

[Last

ync Time]

The time last synchronized with the specified NTP server will be displayed.

[

ynchronize with computer time]

The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],

[Settings Method] will change to [Set manually].

[Time Zone] is not automatically selected, so set it if necessary.

Note

If the NTP server IP address is incorrect or a connection with the NTP server cannot otherwise be established, [Last Sync Time] will not be
updated, or will be left blank.

[Time Zone]

Select the appropriate GMT (Greenwich Mean Time) time difference.

When the time zone is changed and [Apply] is selected, the date and time will be automatically changed based on the

selected time zone.

[Daylight

aving Time]

Select whether to automatically adjust for daylight saving time to suit the time zone.

Summary of Contents for CR-N300
























































































































Search results

Summary of Contents for CR-N300

Reviews:

Related manuals for CR-N300

Brands by name

Popular brands

Canon CR-N300, Settings Manual

Search results

Summary of Contents for CR-N300

Reviews:

Related manuals for CR-N300

Brands by name

Popular brands